THT-100EL - Electrical - Double Rotor Turnstile  Ref: 35

Full Height Turnstiles (Electrical) - Features and Options

  • Electrical Controls
    Electrical controls for entry only, exit only or independent bi-directional electrics controls for both entry and exit. (Standard Feature for electrically operated turnstiles)

  • Fail Lock / Fail safe
    For electrically controlled direction. Status of turnstile when there is no power. Fail-lock direction is locked, fail-safe is free wheeling. (Standard Feature for electrical directions)

  • Free or Locked Exit
    For mechanical operation, direction is always locked or always free rotating. (Standard Feature for mechanical directions)

  • Voltage
    Transformer to step down from 110 VAC or 220 VAC. (Standard Feature for electrically operated turnstiles)

  • Pulse Relay
    Allows one rotation per valid "go" signal regardless of the signal length. (Optional) Recommended Option.

  • Time Out Relay
    Relay to automatically relock turnstile within a preset time if a person cards in and unlocks turnstile but does not go through. (Optional) Recommended Option.

  • Indicator Lights
    Set of red and green lights to indicate if turnstile is locked or unlocked. One set per electrically controlled direction. (Optional)

  • Remote Push button
    Allows turnstile to be released from remote location for one rotation. (Optional)

  • Rotation Detection Switch
    Provides a Form "C" contact closure to the access control system for remote counting and monitoring of turnstile rotations. (Optional)

  • Home Position Switch
    Provides a Form "C" contact closure to access control system when turnstile is in home position. (Optional)

  • Solenoid Activation Switch
    Provides a Form "C" contact closure to access control system that turnstile solenoid has been activated. (Optional)

  • Electronic Key Bypass
    Key to allow turnstile to be held open, overriding card reader. For Fail Safe directions only (Optional)

  • Mechanical Key By Pass
    Key to allow Fail lock direction to be held open during power failure or at times free passage is required. (Optional)

  • Out of Use Lock
    Rings welded to the rotating and barrier section for use of an owner supplied padlock to lock unit and prevent use. (Optional)

  • Card Reader
    Mounting Plate Plate to allow mounting of card reader on shield post

  • Heel Protectors
    Heavy duty foam rubber sleeves to cover bottom turnstile arms. Three required for each 3 armed turnstile, 4 required for each 4 armed turnstile, and 6 or 8 required for the tandem turnstiles (Optional)

  • Ceiling Canopy
    Non-weatherproof, square (for single rotor turnstiles and rectangular for tandem turnstiles) stainless steel canopy instead of the standard top channel cover and partial ceiling plate. This provides for a more pleasing appearance. Round canopy is also available for the single rotor turnstiles. (Optional)

  • Hydraulic Speed Control
    Heavy Duty Shock system that controls rotational speed of the turnstiles to minimize turnstile abuse and provide the increased ease of use. Specifically designed for high volume, abusive conditions. Triangle type for units with welded shield assemblies and the gear type for those units using the strip shield assemblies (This option is standard on all units larger that 66" over all wide in the single rotor type and all clear armed and clear panel types). (Optional)

  • Card Reader Pedestal
    Remote mounted post and mounting plate for card readers.

  • Electro Polishing
    For stainless steel units only. This is a highly suggested option for all units going into a highly corrosive environment. Also may be used in outdoor locations. (Optional)

  • Color of Choice Powder
    Powder coating of colors other than standard black texture powder coating. Colors available are all in standard RAL color numbers. (Optional on all Powder coated units)

  • Anodized Color
    Anodizing of color other than standard clear (satin silver). Colors available are black, dark bronze, Champaign. (Optional)

  • Battery Backup
    Batteries and charger for backup of power. Minimum back up time (tested) is 8 hours for fail lock/fail safe configuration. Includes charger with auto cutoff and trickle charge capabilities.