THT-100 - Mechanical - Double Rotor Turnstile  Ref: 33
Full Height Turnstiles (Mechanical) - Features and Options


  • Free or Locked Exit
    For mechanical operation, direction is always locked or always free rotating. (Standard Feature for mechanical directions)

  • Rotation Detection Switch
    Provides a Form "C" contact closure to the access control system for remote counting and monitoring of turnstile rotations. (Must order the ratchet type -key over ride control- mechanical unit for this option to be installed). (Optional)

  • Mechanical Key By Pass
    Key to allow Fail lock direction to be held open during power failure or at times free passage is required. (Must order the ratchet type -key over ride control- mechanical unit for this option to be installed.) (Optional)

  • Out of Use Lock
    Rings welded to the rotating and barrier section for use of an owner supplied padlock to lock unit and prevent use. (Optional)

  • Heel Protectors
    Heavy duty foam rubber sleeves to cover bottom turnstile arms. Three required for each 3 armed turnstile, 4 required for each 4 armed turnstile, and 6 or 8 required for the tandem turnstiles (Optional)

  • Hydraulic Speed Control
    Heavy Duty Shock system that controls rotational speed of the turnstiles to minimize turnstile abuse and provide the increased ease of use. Specifically designed for high volume, abusive conditions. Triangle type for units with welded shield assemblies and the gear type for those units using the strip shield assemblies (This option is standard on all units larger that 66" over all wide in the single rotor type and all clear armed and clear panel types). (Must order the ratchet type -key over ride control- mechanical unit for this option to be installed.) (Optional)

  • Electro Polishing
    For stainless steel units only. This is a highly suggested option for all units going into a highly corrosive environment. Also may be used in outdoor locations. (Optional)

  • Color of Choice Powder
    Powder coating of colors other than standard black texture powder coating. Colors available are all in standard RAL color numbers. (Optional on all Powder coated units)

  • Anodized Color
    Anodizing of color other than standard clear (satin silver). Colors available are black, dark bronze, Champaign. (Optional on Aluminum units and CSTG clear panel type only)

    		•