TST-75 Series Mechanical  Ref: 23
	Waist High Turnstiles (Mechanical) - Features and Options Free or Locked Exit For mechanical operation, direction is always locked or always free rotating. (Standard Feature for mechanical directions) Rotation Detection Switch Provides a Form "C" contact closure to the access control system for remote counting and monitoring of turnstile rotations. (Optional) Mechanical Key By Pass Key to allow Fail lock direction to be held open for locked directions or at times free passage is required. (Optional) Extended Arms Standard arm length is 16” The TUT-50 and TUT-60 units can have arm lengths to 18 inches. The TST-75 units can have arm lengths to 20 inches (except the collapsible arms units are limited to 16” arms only). We suggest not more than a 2” “air gap” from the end of the arm to the item creating the passage lane. The result is a passage lane width 2” more that the arm set ordered. Electro Polishing Cabinets for TUT-60ES and TST-75 stainless steel units only. This is suggested for highly corrosive environments. Creates an almost mirror like finish, This is NOT #8 mirror finish. Standard finish is #4 satin stainless steel. Second Register Addition of a second counter to count the opposite direction passages Out Of Use Lock Keyed lock to place unit out of use (locked for no passage) Hand Control Control knob at end of cabinet to momentarily lock the normally free rotating direction. Generally this is used by ticket takers when taking tickets to momentarily lock the turnstile while inspecting the ticket for fraud.